PRODUCTS

The Mordomus at home changes lives and that is what sums it up. The Mordomus is not only comfortable, efficient and safe, it frees up your time also performing thousands of actions you usually have to do manually. We create products and solutions that work seamlessly together, are easy to install and affordable. We are the supplier of logic, expertise, software and hardware - a single source of excellence in home automation.

 

 

iThink

Main Module
Communication: By MDiBUS (Half-duplex) and RS232 (Full-duplex);
MDiBus control points: 4500 Adresses;
Inputs: 8 digital inputs, configurable for key reading (3 types of rings), safety equipment reading (PIR, Gas, Fire) and status reading and energy meters;
Outputs: 8 open colector outputs;
Connectivity: 1 x LAN (RJ45), 2 X USB, 1 X Audio Out 2 channels, 1 X MDiBus (RJ45), Bluetooth, WLAN;
Installation: DIN rail or non-standard screws fixation.


iAC88

Control analog inputs and outputs
Communication: By MDiBus;
Inputs: 8 analog inputs, reading equipment with voltage output 0-10V 4-20mA;
Outputs: 8 analog outputs, Control of all types of equipment (0V to 10V);
Installation: DIN rail.


iDI32

32 digital inputs
Communication: By MDiBus;
Inputs: 32 digital inputs, configurable for key reading (3 types of rings), safety equipment reading (PIR, Gas, Fire), status reading and reading of energy meters;
Installation: DIN rail.


iLD88

Motor control and Dimmer Lighting
Communication: By MDiBus;
Inputs: 8 digital inputs, configurable for key reading (3 types of rings), safety equipment reading (PIR, Gas, Fire) and status reading;
Outputs: 8 channels for speed control of small motors and fans, the intensity of halogen lamps;
Installation: DIN rail.


iLED88

LEDs control in dimmer and RGB
Communication: By MDiBus;
Inputs: 8 digital inputs, configurable for key reading (3 types of rings), safety equipment reading (PIR, Gas, Fire), status reading and reading of energy meters;
Outputs: 8 channels for control of the intensity of LED lamps and Control of RGB (multicolored) lamps;
Installation: DIN rail.


iMeteo

Weather station
Communication: By MDiBUS;
Inputs: 4, temperature, brightness, wind intensity and rain detection;
Installation: Outside.


iMS5

Multisensor
Communication: By MDiBus;
Inputs: Infrared inputs(20), temperature(1), brightness(1), motion(1), tamper(1);
Outputs: 8 infrared outputs;
Installation: Inside.


iOC66

Potential free contact inverter
Communication: By MDiBus;
Inputs: 6 digital inputs, configurable for key reading (3 types of rings), safety equipment reading (PIR, Gas, Fire), status reading and reading of energy meters;
Outputs: 6 Channels for control of solenoid valves, heating boilers, air conditioning, small motors, electric gates, switching of loads in general up to 2A;
Installation: DIN rail.


iOCT41

4 digital inputs, 1 output open collector
Communication: By MDiBUS;
Inputs: 4 digital inputs, configurable for key reading (3 types of rings), safety equipment reading (PIR, Gas, Fire) and status reading;
Outputs: 1 output per open collector;
Installation: Junction boxes.


iOW88

Lighting/sockets/windows control
Communication: By MDiBus;
Inputs: 8 digital inputs, configurable for key reading (3 types of rings), safety equipment reading (PIR, Gas, Fire), status reading and reading of energy meters;
Outputs: Control 8 channels ON/OFF, for lighting, outlets, windows. Modes (M1= 8XON/OFF; M2= 6XON/OFF + 1XWindow; M3= 4XON/OFF + 2XWindow; M4= 4XWindow);
Installation: DIN rail.


iPSB

Amplification and breakdown of MDiBus
Communication: By MDiBus;
Applications: Amplification and distribution of the MDiBus for systems placed outside the electrical boards without the RJ45 standard. These systems should be connected to the MDiBus through extensions where the conductors are connected directly to the modules outside the frame without the use of RJ45 plugs. This should be used to connect to the following modules: iMeteo, iMS5, iTM1 and iOCT41;
Installation: DIN rail.


iRM8

Illumination/Socket Relay Chart for iThink
Communication: By MDiBus;
Inputs: Direct contacts to the 8 iThink open collector outputs;
Outputs: Sockets switching, heating boilers, motors, lighting, switching of loads in general;
Installation: DIN rail.


iSND8

Gateway audio
Communication: By MDiBus;
Outputs: 8 independent outputs in volume and audio source;
Audio Inputs: 3 generic inputs (A, B and C) + 8 dedicated inputs, audio bypass for channels A, B and C;
Installation: DIN rail or non-standard screws fixation.


iTM1

Temperature sensor
Communication: By MDiBus;
Inputs: 1 temperature sensor;
Installation: Built-in switch box or in another location exposed to the temperature to be measured.


iTM3

Temperature probes reading
Communication: By MDiBus;
Inputs: 3, thermoresistance reading (PT100 or PT1000) or DS18B20 digital temperature sensor;
Installation: DIN rail.


iUD4

Universal Dimmer
Communication: By MDiBus;
Outputs: 4, control the intensity of halogen and LED lamps;
Installation: DIN rail.


iLO88

LED Lighting Control
Communication: By MDiBus;
Inputs: 8 digital inputs, configurable for key reading (3 types of touch), Reading safety equipment (PIR, Gas, Fire) and reading status;
Outputs: 8 Channels for exclusive control LED lighting at 110/220VAC 100W 250A Peak;
Installation: DIN rail.


iKX3232

KNX TP1 Bus Compatible Interface
Communication: By MDiBus;
Inputs: Reading 32 input groups;
Outputs: Writing for 32 output groups;
Installation: DIN rail.


iLP-280W

Monitor 2.8 Touch Screen HMI
It is equipped with a high-resolution color touch-screen TFT and fits into the wall-mounted electrical boxes;
Resolution LCD: 2.8 'TFT (240 x 320 x 16);
Power supply: +10 ~ 30 VDC;
ESD protection: 4 kV;
Temperature: -20 ~ + 70 °C;
Relative Humidity: 10 ~ 90%, non-condensing;
Dimensions: 76mm (W) X 119mm (H) X 31mm (D).


iDL64

Interface compatible with Dali Bus
Communication: By MDiBUS;
Outputs: Written for 64 DALI outputs;
Installation: DIN rail.


iSLS8

Interface compatible with 485 Solius Bus
Communication: By MDiBUS;
Outputs: Reading and writing of 8 Solius thermostats;
Installation: DIN rail.


Conheça também os nossos Módulos IOT


 

 

Contact us

Contacts

  Phone: +351 238 491 492

  Email: info@mordomus.com

  Address: Gouveia, Portugal

This site uses cookies. By browsing the site you will consent to its use. Learn more about the use of cookies.